Ikke-lineær statisk analyse (elastoplastisitet, del 1)¶
Denne analysen bruker dataene i tutorial/05_plastic_cylinder.
Analyseobjekt¶
Analyseobjektet er den samme 1/8-modellen av en rundstav som i Ikke-lineær statisk analyse (hyperelastisitet, del 1).
| Element | Beskrivelse | Merknader | Referanse |
|---|---|---|---|
| Analysetype | Ikke-lineær statisk analyse (elastoplastisitet) | !SOLUTION,TYPE=NLSTATIC | |
| Antall noder | 629 | ||
| Antall elementer | 432 | ||
| Elementtype | 8-noders lineært heksaederelement | !ELEMENT,TYPE=361 | |
| Materialnavn | MAT1 | !MATERIAL,NAME=MAT1 | |
| Materialegenskaper | ELASTIC,PLASTIC | !ELASTIC !PLASTIC | |
| Randbetingelser | Fastholding, foreskrevet forskyvning | ||
| Matriseløser | CG/SSOR | !SOLVER,METHOD=CG,PRECOND=1 |
Analyseinnhold¶
Innsnevring (necking) av rundstaven som følge av plastisk deformasjon analyseres. Mises-modellen brukes som flytefunksjon. Analysestyringsdataene vises nedenfor.
Analysestyringsdata necking.cnt¶
# Kontrollfil for FISTR
## Analysestyring
!VERSION
3
!SOLUTION, TYPE=NLSTATIC
!WRITE,RESULT,FREQUENCY=10
!WRITE,VISUAL,FREQUENCY=10
## Løserstyring
### Randbetingelse
!BOUNDARY, GRPID=1
LOADS, 3, 3, -7.0
FIX, 3, 3, 0.0
XSYMM, 1, 1, 0.0
YSYMM, 2, 2, 0.0
### Steg
!STEP, SUBSTEPS=40, CONVERG=1.0e-3
BOUNDARY, 1
### Materiale
!MATERIAL, NAME=MAT1
!ELASTIC
206900.0, 0.29
!PLASTIC, YIELD=MISES, HARDEN=MULTILINEAR
450.0, 0.0
608.0, 0.05
679.0, 0.1
732.0, 0.2
752.0, 0.3
766.0, 0.4
780.0, 0.5
### Output
!OUTPUT_VIS
NSTRAIN, ON
!OUTPUT_RES
ISTRESS, ON
### Løserinnstillinger
!SOLVER,METHOD=CG,PRECOND=1,ITERLOG=NO,TIMELOG=YES
2000, 1
1.0e-8, 1.0, 0.0
## Etterbehandlingsstyring
!VISUAL,method=PSR
!surface_num=1
!surface 1
!output_type=VTK
!END
Analyseprosedyre¶
Kjør FrontISTR-kommandoen fistr1.
(Kjøres med 4 tråder)
Analyseresultater¶
For analyseresultatet ved det 35. delsteget er det laget en deformert figur med von Mises-spenningskonturer i REVOCAP_PrePost, vist i figur 4.5.1. Som numeriske data fra analyseresultatet vises også et utdrag av resultatloggfilen nedenfor.
Figur 4.5.1 Analyseresultat for deformasjon og von Mises-spenning
Logg for analyseresultater 0.log¶
fstr_setup: OK
#### Result step= 0
##### Local Summary @Node :Max/IdMax/Min/IdMin####
//U1 0.0000E+00 1 0.0000E+00 1
//U2 0.0000E+00 1 0.0000E+00 1
//U3 0.0000E+00 1 0.0000E+00 1
//E11 0.0000E+00 1 0.0000E+00 1
//E22 0.0000E+00 1 0.0000E+00 1
//E33 0.0000E+00 1 0.0000E+00 1
//E12 0.0000E+00 1 0.0000E+00 1
//E23 0.0000E+00 1 0.0000E+00 1
//E31 0.0000E+00 1 0.0000E+00 1
//S11 0.0000E+00 1 0.0000E+00 1
//S22 0.0000E+00 1 0.0000E+00 1
//S33 0.0000E+00 1 0.0000E+00 1
//S12 0.0000E+00 1 0.0000E+00 1
//S23 0.0000E+00 1 0.0000E+00 1
//S31 0.0000E+00 1 0.0000E+00 1
//SMS 0.0000E+00 1 0.0000E+00 1
##### Local Summary @Element :Max/IdMax/Min/IdMin####
//E11 0.0000E+00 1 0.0000E+00 1
//E22 0.0000E+00 1 0.0000E+00 1
//E33 0.0000E+00 1 0.0000E+00 1
//E12 0.0000E+00 1 0.0000E+00 1
//E23 0.0000E+00 1 0.0000E+00 1
//E31 0.0000E+00 1 0.0000E+00 1
//S11 0.0000E+00 1 0.0000E+00 1
//S22 0.0000E+00 1 0.0000E+00 1
//S33 0.0000E+00 1 0.0000E+00 1
//S12 0.0000E+00 1 0.0000E+00 1
//S23 0.0000E+00 1 0.0000E+00 1
//S31 0.0000E+00 1 0.0000E+00 1
//SMS 0.0000E+00 1 0.0000E+00 1
##### Global Summary @Node :Max/IdMax/Min/IdMin####
//U1 0.0000E+00 1 0.0000E+00 1
//U2 0.0000E+00 1 0.0000E+00 1
//U3 0.0000E+00 1 0.0000E+00 1
//E11 0.0000E+00 1 0.0000E+00 1
//E22 0.0000E+00 1 0.0000E+00 1
//E33 0.0000E+00 1 0.0000E+00 1
//E12 0.0000E+00 1 0.0000E+00 1
//E23 0.0000E+00 1 0.0000E+00 1
//E31 0.0000E+00 1 0.0000E+00 1
//S11 0.0000E+00 1 0.0000E+00 1
//S22 0.0000E+00 1 0.0000E+00 1
//S33 0.0000E+00 1 0.0000E+00 1
//S12 0.0000E+00 1 0.0000E+00 1
//S23 0.0000E+00 1 0.0000E+00 1
//S31 0.0000E+00 1 0.0000E+00 1
//SMS 0.0000E+00 1 0.0000E+00 1
##### Global Summary @Element :Max/IdMax/Min/IdMin####
//E11 0.0000E+00 1 0.0000E+00 1
//E22 0.0000E+00 1 0.0000E+00 1
//E33 0.0000E+00 1 0.0000E+00 1
//E12 0.0000E+00 1 0.0000E+00 1
//E23 0.0000E+00 1 0.0000E+00 1
//E31 0.0000E+00 1 0.0000E+00 1
//S11 0.0000E+00 1 0.0000E+00 1
//S22 0.0000E+00 1 0.0000E+00 1
//S33 0.0000E+00 1 0.0000E+00 1
//S12 0.0000E+00 1 0.0000E+00 1
//S23 0.0000E+00 1 0.0000E+00 1
//S31 0.0000E+00 1 0.0000E+00 1
//SMS 0.0000E+00 1 0.0000E+00 1
...
#### Result step= 40
##### Local Summary @Node :Max/IdMax/Min/IdMin####
//U1 0.0000E+00 1 -3.4606E+00 7
//U2 0.0000E+00 1 -3.4606E+00 13
//U3 0.0000E+00 1 -7.0000E+00 38
//E11 -3.8922E-02 38 -6.4666E-01 14
//E22 -3.8922E-02 50 -6.4666E-01 6
//E33 1.2914E+00 1 7.8682E-02 44
//E12 2.5910E-01 10 -1.1813E-02 387
//E23 9.7554E-03 91 -1.1753E+00 13
//E31 9.7554E-03 88 -1.1753E+00 7
//S11 2.6632E+02 1 -3.6916E+02 192
//S22 2.6632E+02 1 -3.6916E+02 192
//S33 1.0471E+03 1 -4.1469E+01 191
//S12 7.2338E-01 53 -1.3479E+02 387
//S23 5.9172E+01 191 -2.5727E+02 89
//S31 5.9172E+01 191 -2.5727E+02 90
//SMS 7.9063E+02 13 2.4706E+02 190
##### Local Summary @Element :Max/IdMax/Min/IdMin####
//E11 -3.9027E-02 750 -5.5060E-01 345
//E22 -3.9027E-02 750 -5.5060E-01 345
//E33 1.1045E+00 345 7.8722E-02 750
//E12 1.7067E-01 361 -1.6134E-02 414
//E23 -2.0595E-05 756 -9.6480E-01 363
//E31 -2.0595E-05 748 -9.6480E-01 354
//S11 2.6751E+02 345 -3.9312E+02 399
//S22 2.6751E+02 345 -3.9312E+02 399
//S33 1.0447E+03 345 -4.7069E+01 426
//S12 1.4870E+01 361 -1.4324E+02 442
//S23 4.0405E+01 478 -2.8018E+02 393
//S31 4.0405E+01 486 -2.8018E+02 380
//SMS 7.7935E+02 345 2.3268E+02 480
##### Global Summary @Node :Max/IdMax/Min/IdMin####
//U1 0.0000E+00 1 -3.4606E+00 7
//U2 0.0000E+00 1 -3.4606E+00 13
//U3 0.0000E+00 1 -7.0000E+00 38
//E11 -3.8922E-02 38 -6.4666E-01 14
//E22 -3.8922E-02 50 -6.4666E-01 6
//E33 1.2914E+00 1 7.8682E-02 44
//E12 2.5910E-01 10 -1.1813E-02 387
//E23 9.7554E-03 91 -1.1753E+00 13
//E31 9.7554E-03 88 -1.1753E+00 7
//S11 2.6632E+02 1 -3.6916E+02 192
//S22 2.6632E+02 1 -3.6916E+02 192
//S33 1.0471E+03 1 -4.1469E+01 191
//S12 7.2338E-01 53 -1.3479E+02 387
//S23 5.9172E+01 191 -2.5727E+02 89
//S31 5.9172E+01 191 -2.5727E+02 90
//SMS 7.9063E+02 13 2.4706E+02 190
##### Global Summary @Element :Max/IdMax/Min/IdMin####
//E11 -3.9027E-02 750 -5.5060E-01 345
//E22 -3.9027E-02 750 -5.5060E-01 345
//E33 1.1045E+00 345 7.8722E-02 750
//E12 1.7067E-01 361 -1.6134E-02 414
//E23 -2.0595E-05 756 -9.6480E-01 363
//E31 -2.0595E-05 748 -9.6480E-01 354
//S11 2.6751E+02 345 -3.9312E+02 399
//S22 2.6751E+02 345 -3.9312E+02 399
//S33 1.0447E+03 345 -4.7069E+01 426
//S12 1.4870E+01 361 -1.4324E+02 442
//S23 4.0405E+01 478 -2.8018E+02 393
//S31 4.0405E+01 486 -2.8018E+02 380
//SMS 7.7935E+02 345 2.3268E+02 480