Translation update pending
The Swedish translation may be out of date because the Japanese source has changed. The existing translation remains available while it is being updated.
Statisk analys (krypning)¶
För denna analys används data i tutorial/08_creep_cylinder.
Analysobjekt¶
Analysobjektet är samma 1/8-modell av en rundstång som i avsnitt 4.3, icke-linjär statisk analys (hyperelasticitet, del 1).
| Post | Beskrivning | Anmärkningar | Referens |
|---|---|---|---|
| Analystyp | Icke-linjär statisk analys (elastoplasticitet) | !SOLUTION,TYPE=NLSTATIC | |
| Antal noder | 629 | ||
| Antal element | 432 | ||
| Elementtyp | 8-nodigt linjärt hexaederelement | !ELEMENT,TYPE=361 | |
| Materialnamn | MAT1 | !MATERIAL,NAME=MAT1 | |
| Materialegenskaper | ELASTIC,CREEP | !ELASTIC !CREEP,TYPE=NORTON | |
| Randvillkor | Fasthållning, föreskriven förskjutning | ||
| Matrislösare | CG/SSOR | !SOLVER,METHOD=CG,PRECOND=1 |
Analysinnehåll¶
En analys av krypbeteendet utförs genom att en dragförskjutning appliceras i rundstångens axiella riktning. Analysstyrdata visas nedan.
Analysstyrdata cylinder.cnt¶
# Control File for FISTR
## Analysis Control
!VERSION
3
!SOLUTION, TYPE=NLSTATIC
!WRITE,RESULT
!WRITE,VISUAL
## Solver Control
### Boundary Condition
!BOUNDARY, GRPID=1
LOADS, 3, 3, -7.0
FIX, 3, 3, 0.0
XSYMM, 1, 1, 0.0
YSYMM, 2, 2, 0.0
### STEP
!STEP, SUBSTEPS=5, CONVERG=1.0e-5
BOUNDARY, 1
### Material
!MATERIAL, NAME=MAT1
!ELASTIC
206900.0, 0.29
!CREEP, TYPE=NORTON
1.e-10, 5.0, 0.0
### Solver Setting
!SOLVER,METHOD=CG,PRECOND=1,ITERLOG=YES,TIMELOG=YES
10000, 1
1.0e-8, 1.0, 0.0
## Post Control
!VISUAL,method=PSR
!surface_num=1
!surface 1
!output_type=VTK
!END
Analysförfarande¶
Kör FrontISTR-kommandot fistr1.
(Kör med 4 trådar)
Analysresultat¶
För analysresultatet vid det femte delsteget skapas ett deformationsdiagram med konturer för von Mises-spänning med REVOCAP_PrePost och visas i figur 4.8.1. Ett utdrag ur loggfilen för analysresultaten visas också nedan som numeriska data från analysresultaten.
Figur 4.8.1 Analysresultat för deformation och von Mises-spänning
Logg för analysresultat 0.log¶
fstr_setup: OK
#### Result step= 0
##### Local Summary @Node :Max/IdMax/Min/IdMin####
//U1 0.0000E+00 1 0.0000E+00 1
//U2 0.0000E+00 1 0.0000E+00 1
//U3 0.0000E+00 1 0.0000E+00 1
//E11 0.0000E+00 1 0.0000E+00 1
//E22 0.0000E+00 1 0.0000E+00 1
//E33 0.0000E+00 1 0.0000E+00 1
//E12 0.0000E+00 1 0.0000E+00 1
//E23 0.0000E+00 1 0.0000E+00 1
//E31 0.0000E+00 1 0.0000E+00 1
//S11 0.0000E+00 1 0.0000E+00 1
//S22 0.0000E+00 1 0.0000E+00 1
//S33 0.0000E+00 1 0.0000E+00 1
//S12 0.0000E+00 1 0.0000E+00 1
//S23 0.0000E+00 1 0.0000E+00 1
//S31 0.0000E+00 1 0.0000E+00 1
//SMS 0.0000E+00 1 0.0000E+00 1
##### Local Summary @Element :Max/IdMax/Min/IdMin####
//E11 0.0000E+00 1 0.0000E+00 1
//E22 0.0000E+00 1 0.0000E+00 1
//E33 0.0000E+00 1 0.0000E+00 1
//E12 0.0000E+00 1 0.0000E+00 1
//E23 0.0000E+00 1 0.0000E+00 1
//E31 0.0000E+00 1 0.0000E+00 1
//S11 0.0000E+00 1 0.0000E+00 1
//S22 0.0000E+00 1 0.0000E+00 1
//S33 0.0000E+00 1 0.0000E+00 1
//S12 0.0000E+00 1 0.0000E+00 1
//S23 0.0000E+00 1 0.0000E+00 1
//S31 0.0000E+00 1 0.0000E+00 1
//SMS 0.0000E+00 1 0.0000E+00 1
##### Global Summary @Node :Max/IdMax/Min/IdMin####
//U1 0.0000E+00 1 0.0000E+00 1
//U2 0.0000E+00 1 0.0000E+00 1
//U3 0.0000E+00 1 0.0000E+00 1
//E11 0.0000E+00 1 0.0000E+00 1
//E22 0.0000E+00 1 0.0000E+00 1
//E33 0.0000E+00 1 0.0000E+00 1
//E12 0.0000E+00 1 0.0000E+00 1
//E23 0.0000E+00 1 0.0000E+00 1
//E31 0.0000E+00 1 0.0000E+00 1
//S11 0.0000E+00 1 0.0000E+00 1
//S22 0.0000E+00 1 0.0000E+00 1
//S33 0.0000E+00 1 0.0000E+00 1
//S12 0.0000E+00 1 0.0000E+00 1
//S23 0.0000E+00 1 0.0000E+00 1
//S31 0.0000E+00 1 0.0000E+00 1
//SMS 0.0000E+00 1 0.0000E+00 1
##### Global Summary @Element :Max/IdMax/Min/IdMin####
//E11 0.0000E+00 1 0.0000E+00 1
//E22 0.0000E+00 1 0.0000E+00 1
//E33 0.0000E+00 1 0.0000E+00 1
//E12 0.0000E+00 1 0.0000E+00 1
//E23 0.0000E+00 1 0.0000E+00 1
//E31 0.0000E+00 1 0.0000E+00 1
//S11 0.0000E+00 1 0.0000E+00 1
//S22 0.0000E+00 1 0.0000E+00 1
//S33 0.0000E+00 1 0.0000E+00 1
//S12 0.0000E+00 1 0.0000E+00 1
//S23 0.0000E+00 1 0.0000E+00 1
//S31 0.0000E+00 1 0.0000E+00 1
//SMS 0.0000E+00 1 0.0000E+00 1
...
#### Result step= 5
##### Local Summary @Node :Max/IdMax/Min/IdMin####
//U1 0.0000E+00 1 -4.1863E-01 91
//U2 0.0000E+00 1 -4.1863E-01 88
//U3 0.0000E+00 1 -7.0000E+00 38
//E11 -6.5748E-02 38 -6.9459E-02 7
//E22 -6.5748E-02 50 -6.9459E-02 13
//E33 2.3884E-01 13 2.2745E-01 50
//E12 5.5591E-04 53 -5.7135E-04 10
//E23 1.0510E-04 72 -2.0805E-03 84
//E31 1.0510E-04 64 -2.0805E-03 95
//S11 1.1232E+02 14 -1.1026E+02 49
//S22 1.1232E+02 6 -1.1026E+02 39
//S33 4.7484E+04 7 4.5271E+04 50
//S12 4.2781E+01 53 -4.3872E+01 10
//S23 7.8190E+00 72 -1.6257E+02 84
//S31 7.8190E+00 64 -1.6257E+02 95
//SMS 4.7448E+04 7 4.5307E+04 50
##### Local Summary @Element :Max/IdMax/Min/IdMin####
//E11 -6.6010E-02 759 -6.9186E-02 354
//E22 -6.6010E-02 768 -6.9186E-02 363
//E33 2.3840E-01 363 2.2788E-01 768
//E12 4.9263E-04 766 -5.0184E-04 360
//E23 -1.6179E-05 753 -1.9977E-03 498
//E31 -1.6179E-05 749 -1.9977E-03 489
//S11 1.0954E+02 363 -1.0744E+02 768
//S22 1.0954E+02 354 -1.0744E+02 759
//S33 4.7416E+04 354 4.5337E+04 759
//S12 3.7890E+01 766 -3.8501E+01 360
//S23 -1.3249E+00 753 -1.5632E+02 498
//S31 -1.3250E+00 749 -1.5632E+02 489
//SMS 4.7346E+04 363 4.5406E+04 759
##### Global Summary @Node :Max/IdMax/Min/IdMin####
//U1 0.0000E+00 1 -4.1863E-01 91
//U2 0.0000E+00 1 -4.1863E-01 88
//U3 0.0000E+00 1 -7.0000E+00 38
//E11 -6.5748E-02 38 -6.9459E-02 7
//E22 -6.5748E-02 50 -6.9459E-02 13
//E33 2.3884E-01 13 2.2745E-01 50
//E12 5.5591E-04 53 -5.7135E-04 10
//E23 1.0510E-04 72 -2.0805E-03 84
//E31 1.0510E-04 64 -2.0805E-03 95
//S11 1.1232E+02 14 -1.1026E+02 49
//S22 1.1232E+02 6 -1.1026E+02 39
//S33 4.7484E+04 7 4.5271E+04 50
//S12 4.2781E+01 53 -4.3872E+01 10
//S23 7.8190E+00 72 -1.6257E+02 84
//S31 7.8190E+00 64 -1.6257E+02 95
//SMS 4.7448E+04 7 4.5307E+04 50
##### Global Summary @Element :Max/IdMax/Min/IdMin####
//E11 -6.6010E-02 759 -6.9186E-02 354
//E22 -6.6010E-02 768 -6.9186E-02 363
//E33 2.3840E-01 363 2.2788E-01 768
//E12 4.9263E-04 766 -5.0184E-04 360
//E23 -1.6179E-05 753 -1.9977E-03 498
//E31 -1.6179E-05 749 -1.9977E-03 489
//S11 1.0954E+02 363 -1.0744E+02 768
//S22 1.0954E+02 354 -1.0744E+02 759
//S33 4.7416E+04 354 4.5337E+04 759
//S12 3.7890E+01 766 -3.8501E+01 360
//S23 -1.3249E+00 753 -1.5632E+02 498
//S31 -1.3250E+00 749 -1.5632E+02 489
//SMS 4.7346E+04 363 4.5406E+04 759